‘Must Know Info’
Easy to follow guidelines and tips regarding Fire Fighting/Fire Prevention
MUST KNOW INFO
- Not all fires are the same. Different fuels create different fires and require different types of fire extinguishing agents.
- Type A – Class A fires include ordinary combustible materials such as wood, paper, cloth, trash and plastics.
- Type B - Class B fires involve fammable liquids such as gasoline, petroleum, oil and paint. They also include flammable gases such as propane and butane.
- Type C - Class C fires involve energized electrical equipment such as motors, transformers and appliances. Remove the power and the Class C fire becomes one of the other classes of fires.
- Type D - Class D fires involve combustible materials such as potassium, sodium, aluminum and magnesium.
- Type K - Class K fires involve cooking oils, greases such as animal fats and vegetable fats.
- Some types of fire extinguishing agents can be used on more than one class of fire. Others have warnings where it would be dangerous for the operator to use a particular fire extinguishing agent.
A fire extinguisher, or extinguisher, is an active fire protection device used to extinguish or control small fires, often in emergency situations.Typically, a fire extinguisher consists of a hand-held cylindrical pressure vessel containing an agent which can be discharged to extinguish a fire. Fire extinguishers manufactured with non-cylindrical pressure vessels also exist, but are less common. The first fire extinguisher of which there is any record was patented in England in 1723 by Ambrose Godfrey, a celebrated chemist at that time. It consisted of a cask of fire-extinguishing liquid containing a pewter chamber of gunpowder. This was connected with a system of fuses which were ignited, exploding the gunpowder and scattering the solution. This device was probably used to a limited extent, as Bradley’s Weekly Messenger for November 7, 1729, refers to its efficiency in stopping a fire in London. The modern fire extinguisher was invented by British Captain George William Manby in 1818; it consisted of a copper vessel of 3 gallons (13.6 liters) of pearl ash (potassium carbonate) solution contained within compressed air.
TYPES OF EXTINGUISHING AGENTS
- Dry chemical This is a powder based agent that extinguishes by separating the four parts of the fire tetrahedron. It prevents the chemical reactions involving heat, fuel, and oxygen (combustion), thus extinguishing the fire.
- Water types These extinguisheers cools burning material. Very effective against fires in furniture, fabrics, etc. (including deep seated fires), and can be safely used only in the absence of electricity.
- Halons & Carbon Dioxide Clean agents extinguish fire by displacing oxygen (CO2 or inert gases), removing heat from the combustion zone (Halotron-1, FE-36, Novec 1230) or inhibiting the chemical chain reaction (Halons). They are referred to as clean agents because they do not leave any residue after discharge which is ideal for protecting sensitive electronics, aircraft, armored vehicles and archival storage, museums, and valuable documents.